Since 1975
Nearly 50 years manufacturing experiences
Nearly 50 years manufacturing experiences
High quality 2.7m2 electrolyzer exchange with AKC&NBZ cells in Chlor-Alkali plant
Zero-gap Bipolar Unit Cell size: TJ-Ⅰ: 2402mmW×1285mmH×62mmT TJ-Ⅱ: 2402mmW×1202mmH×62mmT
Effective Area: 2.7m2
Operation Current Density:1.5~6.0kA/m2
DC Power Consumption:≤2050kWh/NaOH (6.0kA/m2)
Unit Cell Voltage: ≤2.96V (6.0kA/m2)
Specific:
● It can be used interchangeably with Asahi Kasei electrolyzer cells and Blue Star Electrolyzer cells
● More scientific design of internal circulation structure of anode
● The unit electrolyzer liquid and gas separation structure is better
● The electrical conductivity of conductors in the unit electrolyzer is good
● Electrolyzer rigidity is strong.
● The end electrolyzer conducts evenly.
● Reasonable cathode structure and surface mesh installation
Better circulation
The anode chamber recirculation structure of the buffer plate is changed to a trapezoidal design.
So that the cell in the high current density operation, the liquid distribution tends to even more uniform, there are diagonal flow, so that the electrolyte concentration within the cell more uniform.
Better Gas and Liquid separation
In the upper part of the unit cell using corrugated board and filter double separation of gas-liquid separation structure. Chlorine gas by the corrugated board plate and weir plate, filter bubbles, improve the gas-liquid separation effect.
Lower leakage current
The anode and cathode outlet hose is lengthened from 940mm to 1040mm.
A lower voltage drop configuration
Composite strip of titanium, nickel and anode side of the titanium plate and cathode side of the nickel plate welding, good conductivity.
The material of the conductive layer frame is stainless steel without rust, extending the service life of the unit cell.
Unit cell current conduction effect is better.
Terminal cell conductive copper, with 10 copper into the bottom of the cell, the conductive more uniform, more suitable for high current density operation.
Unit cell is more rigid.
TJ unit cell rigidity and other electrolyser rigid appearance.
TJ unit cell using steel plate cutting process, the flange surface is more smooth, improve the unit tank rigidity.
The top of the cathode mesh is easier to remove air bubbles.
Activation of the cathode mesh through the concave fixed mesh, in the case of compression better flexibility, the upper gap increases, the cathodic fluid diversion more smoothly.
Contact Us
